QUANTRIX® QA-SolCut13
Lubricant Additives & Packages The Quantrix® line delivers advanced additive technologies engineered for performance in automotive, industrial, marine, and specialty lubrication systems. Our packages are formulated to optimize tribological properties, thermal stability, and contaminant control, adhering to API, ACEA, ILSAC, and OEM-specific standards. Whether for engine oils, gear oils, hydraulic fluids, or transmission fluids, Quantrix® additives offer exceptional protection against wear, deposits, and oxidation—ensuring extended equipment life and superior efficiency in demanding environments.
QUANTRIX® QA-SolCut 13 is a high-performance additive package specially designed for formulating water-miscible cutting fluids offering high compatibility with paraffinic base oils. This additive is a combination of high-quality anionic and nonionic emulsifiers, biocide and corrosion inhibitor agents, and other performance components.
QUANTRIX® QA-SolCut 13 is compatible with virgin Group I & II base oils with a maximum aniline point of 112°C.
While formulating soluble cutting oils with QUANTRIX® QA-SolCut 13, SN150 paraffinic base oil is highly recommended.
Features:
• Outstanding corrosion protection
• Biodegradable
• Self emulsifiable
• Superb emulsification properties with paraffinic base oils
• Excellent hard water stability
• Superior foaming control
Applications:
QUANTRIX® QA-SolCut 13 can be used in formulating water-miscible cutting fluids for metalworking applications.
| Characteristics: Parameter | TEST METHOD | TYPICAL VALUES |
|---|---|---|
|
Colour |
Visual |
Reddish Brown |
|
Appearance |
Visual |
Clear Viscous Liquid |
|
Kinematic Viscosity at 100°C, cSt |
ASTM D445 |
27 |
|
Specific Gravity at 30°C |
ASTM D1298 |
1.01 |
|
Acid Value, mg KOH/g |
ASTM D974-04 |
25 Max. |
|
Amine Value, mg KOH/g |
Internal |
56 |
|
pH (5% in Distilled Water) |
Internal |
9.9 |
|
Note: The properties mentioned above are typical and not considered delivery specifications. |
| Perfrmance Parameter | TEST METHOD | TYPICAL VALUES |
|---|---|---|
|
18% w/w Solubility in SN 150 Group I Base Oil |
Internal |
Clear |
|
5% Emulsion in Tap Water |
Internal |
Stable |
|
5% Emulsion in 500 ppm Hard Water |
Internal |
Stable |
|
Cast Iron Corrosion |
IS 1115 |
0/1-1 Max. |
|
Refractive Index of 5% Emulsion in Tap Water |
ASTM D1747 |
5.0 – 6.0 |
|
Froth Test of 5% Emulsion in 200 ppm Hard Water |
IS 1115 |
Passes |
|
Heat Stability at 70°C |
IS 1115 |
Stable |
Treat Rate:
Recommended treat rate of QUANTRIX® QA-SolCut 13 is 18.0 wt.%. For more details, refer to the related Guideline document.
Handling:
- Store in a dry, cool, and well-ventilated place away from heat and ignition sources. For more information, refer to the Drum Storage Guide.
- For health and safety precautions, refer to the related Safety Data Sheet (SDS).
